2013 MAC TRAILER MFG 14.63 m

2013

MAC TRAILER MFG

5MAMN4820DC022092

Usado

M022092

2012 MAC 48' TIPPER TRAILER BODY Length: 48’ Width: 102” Wall Height: 102” Top Rail Option: 6W x 9T x 5/8 Wall Thickness: 0.165” Floor: Standard ¼ Full Crossmember Spacing: 5 ¼” C/M, 10” (3) ¼ x 4 x 8 Tubing under Floor Bottom Rail: Std. 5 Clean-Out Upright Height: 93”, Heavy 3 ½ x 10 Number of Uprights: 17 Spacing of Uprights: 30.125 Rear Pocket Height: 115 Rubber Seal: No Tarp Bar: None Lower Bulkhead Wrap: Yes Bulkhead Type: Std. 3/16 Bulkhead Height: 107 ¾" Bulkhead Steps / Catwalk: Catwalk & Ladder with steps inside Tarp Hooks: Bulkhead and Gate Flaps, Rear Axle: Flap rear of tires Flaps, Front Axles: None Upper Cross Tubes/Caps: (1) Spring-Mid LIGHTS Light Type: Grote LED w/ Grommets (all) Light Panel: 3 large – 3 small –3 large Light Shield/Apron: 3/8 x 2 split light shield Marker Lights: 3 each side Midturns: 1 pair LED Bracket Back-up Lights: None Rear Pocket Lights: Pair of Small Switch Enclosure: None Auxilary Cable: None GATE Gate Height: 103 3/8” Gate Width: 96” Gate Type: Gate is Lift Out Gate w/ cut outs for fork lifts. V Style Block for Gate to Slide into Gate Sheet Thickness: 0.165 (3 panel) Safety Chain: No Winders/Safety Latch: Winders (1) Each Side CHASSIS Model: Tandem Sub Frame Rails: (Std) Tandem 12” I-Beam (aluminum), 48 wide Sub Frame Width: 47.25 Pin Setting: 36” Tractor Drive Model: Tandem Drive 5th Wheel Plate: @ 48” high Pin to Axle Setting: 513, 27 Rear Setting Suspension: Hendrickson Intraax AA-250 TP Springs: Air Axle Spacing: 122” Suspension Control: Ball Valve Axles: (2) Axle for Intraax only ABS: (1) 2S1M Meritor/Wabco Brakes: 7” XL, W/30-30 Chambers Slacks: (Std) Gunite Cam Guards (All Axles): Standard Tires: Misc. Tire Inflation System: None Rim: Steel HP 22.5 x 8.25 10 Hole White Hub/Drum: (4) Cast w/ Steel Hub HP 10 Stud TP, SS, 7 Dust Covers: No Dollies-Landing Gear: (Std) Jost –5 year No Lube – D.S. Reverse Mount Air Guage/System: No Air Tanks: 12 Steel Air Tanks Tow Hooks: None Bumper: (Std) Tipper Bumper with Steel Pads LIFT AXLE None TARP None PAINT Chassis Color: Black Pin Striping: Black Mac Logos: Mac Black Weight: 15,641 lbs. +/-3% Volume: 117 cu yds. Additional work done at KTR - Acid wash trailer - Cut and remove upper portion of bulkhead, grind clean - Cut and fit repair section of bulkhead, square up to trailer, tack weld in place - Cut and fit bulkhead band to support bulkhead, weld all seams solid - Add 1/2" round stock to top of bulkhead - Make and weld on ladder standoffs, reinstall ladder - Patch hole on tailgate - Replace right rear hubcap - Replace faulty brake chamber, replace slack adjuster pins - Acid wash front and rear of trailer to blend in repairs

14.63 m