Descripción
New Versatile SD 650 Offset Disc
Financing as Low at 0% for 24 Months on All New Versatile Implements through 9/30/2026! Terms and Conditions Apply-See Store For Details
12" Blade Spacing,
30" X 3/8" Blades, Notched Front & Plain Rear,
Bearing Trash Guards,
Adjustment Wrench Set
Versatile’s Offset Disc has been proven over hundreds of thousands of acres. Versatile offset discs are all-purpose machines built with the strength needed to perform. An assortment of weight classes, working widths ranging from 10' to 20' (3.0-6.1 m), and 10 ½" or 12" (266 or 305 mm) blade spacings are available. This wide selection of features and options means that the right machine is available to suit any operational needs. The Versatile SD550 is an all-purpose offset disc that provides the flexibility of doing either primary or secondary tillage work. The SD550 weighs 550 lb/ft and is available in 10.5" blade spacing with 24" or 26" blades.
Stone Flex Hangers are standard on all Versatile offset discs. With the extreme thrust forces present on a disc and the potential for large rocks in some areas, the Stone-Flex hanger is a perfect choice for absorbing shock loads. The 1 ¼" x 2- ½” C-shaped spring steel reacts to both vertical and horizontal forces. Disc blade penetration is not compromised.
Versatile Blade Scrapers-All Versatile discs feature one piece, 4" wide blade scrapers made of carbon steel for long wear life. The scrapers are U-bolt mounted for maximum adjustment on a heavy-duty tubular steel bar. All scrapers are located high end to the inside of the blade for maximum trash flow and to reduce draft requirements. This eliminates the need for trash guards.
Versatile Adjustable Gang Angle-
Versatile offset discs allows operators to change the angle of cut between three different positions. This causes the disc to cut with more or less aggressive discing action. Soil conditions such as residue or trash levels, moisture, etc. change from year to year and only a disc with adjustable gang angle will perform well in all these different types of conditions.
Versatile Positive Depth Control-
A 5½” heavy-duty rockshaft with greaseable bearings is the foundation of the single offset disc's depth control system. A single cylinder with positive depth control segments provides consistent and repeatable working depth. An adjustable crank allows the operator to quickly level the disc from front to back to perfectly match the tillage conditions.
Versatile Removable Spindle Axles
Versatile offset discs are built with maintenance concerns in mind. All spindle axles are designed for easy removal and maximum strength. Each spindle is bolted into a sleeve and can be removed by simply removing the bolt and pulling out the axle. This will save valuable time if repairs to a tire are needed.
Versatile Steel Fabricated Spools
Versatile discs feature fabricated steel half and full spools. Unlike cast iron spools, steel spools can withstand far greater shock loads from rocks or stumps thereby eliminating spool breakage. Compressed to the industry’s highest clamp load during assembly, Versatile's fabricated spools ensure the gang will not shift and become loose.
Versatile Large Gang Shaft
All Versatile discs feature a large 1 15/16" diameter, high carbon steel gang shaft. This gang shaft along with Versatile's steel fabricated spools allows the gang assembly to be torqued at the factory to 3,200 ft/lb.
Versatile Furrow Filler Blades
In order to get the most uniform and consistent field finish, Versatile offset discs have furrow filler blades as standard equipment. On larger working widths two furrow fillers are standard, one 4" smaller than the working blades and one 8" smaller. One furrow filler blade that is 4" smaller than the working blades is standard on smaller working widths. These blades along with full sizes blades work together to create a uniform well-worked field.Especificaciones
FabricanteVERSATILE
ModeloSD650
Número de serieSD65024066053
CondiciónNuevo
WarrantySí
Numero de stockSD65024066053
Warranty TypeOriginal
Condición de UsoCondición Operable
EscrepasSí
Rellenos de SurcosSí
Luces de seguridadSí
Tipo de MontajePull-Type
Tipo de DiscoOffset
Tipo de Marco1-Section
Tipo de UniónRigid
Ángulo de Unión AjustableSí
Número de Cuchillas Delanteras18
Front Disk Blade Size76.2 cm
Tipo de Cuchilla DelanteraMellado
Número de Cuchillas Traseras18
Rear Disk Blade Size76.2 cm
Tipo de Cuchilla TraseraLiso
Espaciado30.48 cm
Control de ProfundidadSí
NivelaciónSí
Tipo de NivelaciónMechanical
Field ReadySí
Ancho5.49 m
Length579.12 cm
Height12.7 cm
Weight4,923.29 kg
Longitud de envío579.12 cm
Ancho de envío624.84 cm
Altura de envío12.7 cm
Peso de envío4,923.29 kg
FabricanteVERSATILE|
ModeloSD650|
Número de serieSD65024066053|
CondiciónNuevo|
WarrantySí|
Numero de stockSD65024066053|
Warranty TypeOriginal|
Condición de UsoCondición Operable|
EscrepasSí|
Rellenos de SurcosSí|
Luces de seguridadSí|
Tipo de MontajePull-Type|
Tipo de DiscoOffset|
Tipo de Marco1-Section|
Tipo de UniónRigid|
Ángulo de Unión AjustableSí|
Número de Cuchillas Delanteras18|
Front Disk Blade Size76.2 cm|
Tipo de Cuchilla DelanteraMellado|
Número de Cuchillas Traseras18|
Rear Disk Blade Size76.2 cm|
Tipo de Cuchilla TraseraLiso|
Espaciado30.48 cm|
Control de ProfundidadSí|
NivelaciónSí|
Tipo de NivelaciónMechanical|
Field ReadySí|
Ancho5.49 m|
Length579.12 cm|
Height12.7 cm|
Weight4,923.29 kg|
Longitud de envío579.12 cm|
Ancho de envío624.84 cm|
Altura de envío12.7 cm|
Peso de envío4,923.29 kg|
